White SRI

Hi guys, been a while since I've posted any updates on the mera and think its about time.
Been busy wi work really so not done as much to the car as I was wanted.

First job was to sort the n/s outer C.V joint had some pics of this but lost them. But guessing everyone knows what the C.V joint looks like and how its changed right? Whilst doing this job I changed the gearbox oil and put some molyslip in......this stuffs supposed to make gearbox smoother. It does feel nicer with this and the fresh oil in. Worth changing the gear box oil to keep car maintained...good mod if you can call it that!

So i figured if the cars up on axel stands I might as well put in the lowered shocks n springs for the front that i got from RAJackson (thanks mate). Guess what.... I had pics of this but lost em to lol Not doing very well at showing what I've done so far am I lol

Ok, then I wanted to 'clean up' the engine bay and give it a bit more 'umpf' so I got onto ebay and got myself the Focus induction kit on order.

Thought the rocker cover needed cleaning and spraying so I set about doing just that. At the same time I thought why not just colour code the door handles and the light at the same time....so here goes:-


Engine bay as was:-
24102009216.jpg




Rocker cover cleaned up with lots of elbow grease and loads of washing up liquid...got ma ass kicked for using so much washing up liquid lol.....looks nice and shiney tho lol
24102009221.jpg




Few passes of white primer...looks nice already :)
24102009225.jpg



Few passes of top coat which is standard white hycote gloss spray.
27102009232.jpg


Wanted the 16valve bit either black or silver...opted for silver:-
28102009238.jpg

28102009239.jpg

28102009240.jpg


Now the Nissan has to be in red to colour match the SRI badge on the tail gate, red lighths, and red nissan badge on front of car......extra detail of pinstripe added:-......lookins sexy me thinks lol

01112009252.jpg

01112009253.jpg

01112009254.jpg

29102009246.jpg

29102009245.jpg


Whilst doing this little rocker cover project I sprayed the rear lights and got maself a shark fin ariel:-

25102009226.jpg

25102009230.jpg

25102009231.jpg


Not put the ariel on just yet. Can't be arsed putting it on yet really. lol

Rear lights sprayed fully and laquered in front room drying with warmth....looking good me thinks:-
02112009256.jpg



Ok, so I also set about spraying the handles......has some progress pics but I've lost them to but here's the result....you can see front lowered bit:-

22112009275.jpg

22112009276.jpg



Put the rear lights on:-

22112009274.jpg

22112009272.jpg

22112009273.jpg


Induction kit and rocker cover installed, mani heat shield painted black......(90degree bend needs painting black and tightening up a bit more)............Sounds immense for a 1.6, pulls better but you feel the induction kit working best at high revs (3-5k) when on motorway. At low revs it sound good but don't see much performance diff unless you plant foot down but then it drinks like a camel lol:-

20112009270.jpg

20112009268.jpg

20112009269.jpg




Comments and ideas most welcome.
 
Before and after pics so far....................

Engine bay so far.........
24102009216.jpg

20112009268.jpg


Handles, sills and lights
10102009173.jpg

22112009273.jpg


10102009183.jpg

22112009274.jpg


Lowered fronts end......back end needs lowering but think it looks good....will do rears for more stability tho.
Not same angle pics but you can see diff:-

DSC01486.jpg

22112009275.jpg
 
Quick question........how would I go about bringing the rear wheels out slightly. Want them more in line with arches if possible to do safely. If its not safe then I don't wanna do it. Don't want to compromise safety for looks. Thanks in advance guys.
 
If im honest, i dont like the rear lights. Each to there own. Get some spacers for the rear wheels that will bring them out.

Gav
 
If im honest, i dont like the rear lights. Each to there own. Get some spacers for the rear wheels that will bring them out.

Gav

To be honest mate I was a bit unsure to do it or not. But then I've done it now. Looks better in person than pics I think. If I get some Lucino's I'll gladly boot these in the bin lol.

If I put in spacers, will i need longer studs?
 
I dont think so, but check first. I had spacers on with 17"s and used the same studs with the stock alloys when i changed back. (without spacers)
 
Coming along really nicely mate :thumb: Lovely little mods that add up. Not keep on the painted rear lights either tbh but the rocker cover and colourcoded handles are spot on :).

Simple cheap 5mm spacers you'll get away with but anymore and you should really get hubcentric spacers. I think you can do 10mm on the front and 15mm on the rear, maybe even 20mm.
 
looks good mate, although i personally think you should have left the oil cap black.

i'll warn you, the car will get lower once the springs settle in ;)
 
car looks amazing .. well done

you can send the lights my way if you get your other rear ones :p

lol

very nice clean engine bay, wish mine was that clean :(
 
Ok long due update. done these wheels a while ago. Just never got round to post. Alloys yet to go on car. Will do as soon as kit is sprayed. Any way heres a few pics of the bits I've done.

Alloys being preped:-



All alloys few coats of white primer:-


And the centre caps:-



Masking off edge all around rim:-



Few coats of Holts Gloss white spray:-



Edge unmasked then alloy masked for spraying lip:-


More triming and masking:-


Alloy fully masked leaving only primered lip exposed:-


All alloys ready preped for second stage:-



Flame Red Spray few coats:-



Time for unwrapping:-


Nearly there:-


Result!:-


More finished pics (with better camera):-




Red lip edge:-






Inside rim also done. Before:-


After (not bothered about overspray onto tyre. it's on inside wall so no big deal really) :-


Very very happy with final result:-



Also did the quad taillight mod....JDM styleee
(black bumper on as temp till GTi gets sprayed):-




Quad tail lights with rear fogs on:-



Ph1 Gti Rear bumper, skirts and original Ph2 Sri splitter going in to Kristians worshop for spraying this week. Thats when brakes get Gti upgrades done. Got some mintex pads for front. ordering some new shoes for back. Then alloys can go on. Oh and the exhaust once I've found and old back box for cheap for the flange end. Strut brace getting tarted up to to sit nicely in engine bay. Toying with idea of an SR20 conversion now lol.
 
I like the job you've done on the wheels, looks very professional!

I had a full GTi exhaust lying around which you could have had for a good price.
 
Great job on those wheels mate :thumb: Lets see pics of them on the car once they're cured :)
 
haha wouldn't be my prov spec black bumper would it. have to say car looks better in person. was good meeting you mate. looking good keep up the good work
 
I like the job you've done on the wheels, looks very professional!

I had a full GTi exhaust lying around which you could have had for a good price.

Thanks mate, took ma time doing them, very happy with finish. yeah pm me with price for box pal. cheap as chips if poss lol

---------- Post added at 17:34 ---------- Previous post was at 17:34 ----------

Great job on those wheels mate :thumb: Lets see pics of them on the car once they're cured :)

Thanks Ed, yeah will post some pics up soon as kits sprayed and on. be week of so from now with bit of luck.
 
haha wouldn't be my prov spec black bumper would it. have to say car looks better in person. was good meeting you mate. looking good keep up the good work

Lol yeah thats the bumper pal. Good meetin you to. Ya motor lookin better with bumper n arches sorted.
 
Back
Top Bottom