Search results

I love you guys this much I went out into the night and took some pics of how my headlights show. The set with the tree's showing the cutoff point was on my way out of the cemetery. I think I may have caught some grave robbers last night :eek:

I dont know how to embed youtube vids but this is how I got mine off.

A coworker got one of these, that rust around the mirror seems to be a popular occurrence. Its a pretty nice car otherwise.

This is how it shows in the night, I dont have a pic in the pitch dark but I can take one out this weekend. This one was taken lower down so the camera lens fell within the beam: This one over the cutoff point: This one from on top: And this these are everything all out for...

The light output was basically limited to all a reflector type headlight assembly can do for you. The black finisher over the pair of wells is what allows light to escape so you are in fact limited to only what those openings let out. The projector on the other hand, it focuses the beam so no...

http://jdmautolights.com/nissan-sentra-0002-black-headlights-with-corners-p-1466.html?osCsid=39b1a6eec8705e0202471faf540c94fd I had these before but decided to get the newer ones. The indicators were too easy to steal and people were in fact stealing them so with these, no worries. Plus they...

Did you test fit them? Thing about fiberglass resin is that it gets hard but brittle and can break easy. It has very little strength on its own with the accompanying kitty mat. I chose the fiberglass route to repair a broken front grill and much to my surprise it broke before I even mounted...

Have you thought of cloning the area with polyester resin, chop it off, remake a replacement with epoxy resin and attach? Many moons ago My rear right fender got hit and seems the repairman did a good job at repairing the dent but damaged the breather on the underside of the bumper. Water...

This is what she looks like with the grill back on. Its really dirty and the repair is not finished yet in this pic. Over the next few weeks I will get to work on it and open up those headlamps to paint the projector shroud black.

If the wiring in the dash is anything like the similar models it supposed to have: B+ Illumination Ignition FR+ and FR- FL+ and FL- RR+ and RR- RL+ and RL- Like I said, its an IF. I'm not sure much has changed from the previous models to the one I have. My sisters Nissan b15 sentra had...

When you say "upgrade" you mean the unit itself or adding in other equipment?

I'm not too sure what they call it back at Singapore, here in Trinidad they call it the Nissan Almera. I know some places call it the Pulsar and others the Sentra / Sunny. I swapped my grill for one like yours a long while back but got ran off the road by a truck. I lost my front bumper, fog...

Thanks for the warm welcome guys. Yup edk, N16 Sentra. They call it the Nissan Almera here, mine came from Singapore.

Yanked out my driver side seat belt to clean it a few months back. I pulled the plug to disconnect the airbag and upon re installing the airbag light began blinking. I tried the playing with the door switch method with no success. Eventually I found a vid on youtube with a tutorial. It...

Extend the wire and try a solid clean spot. Most simply tuck it under one of the screws that hold the head unit in place. Behind the head unit inside the dash is a solid piece of metal running straight across, drill it and ground there with a screw. I once had a similar problem but it...

Check your grounds and wiring. Sounds like something is not connected properly or try another ground point.

Most likely black. Where is it grounded and what head unit?

Hi guys, stumbled upon this forum just now and decided to join. I'm an N16 owner just under 7 years now and saw a lot of you guys have similar cars and did a few mods here and there. I hope to learn a thing or two in here. lyn

I'm new, this is my first post. Nothing really fancy about my engine bay, its basically stock and the Nissan emblem fell off the engine cover. I have been meaning to get one. I saw someone asking earlier about cleaning the engine bay. I use simple green 'crystal', a soft paint brush and a...