Stereo in lower Din Hole

cjhawker

cjhawker

Does anyone have there stereo in the lower DIN hole?

If so,
1. have you got a pics of how it looks
2. Is it a pain in the ar$e to use
3. Can you see the screen ok (becuase of the angle and low position)
4. Do all of the cables reach ok or do you need extensions for any of them, like the areial or ISO stuff
 
it will fit and work fine i had it that way in the old almera found it alot easyer to use asell and the gear stick dosent hit it
 
I have in my Primera :)

interior.jpg
 
Got mine at the bottom too, had to entend the wires slightly as they wouldn't reach (last owner cut wires to get radio out as garage I got it from got an autoelectrician to put a new one in) but apart from that is ok there. Aerial reached ok it was the ISO plugs that needed extending on mine but as long as yours haven't been tampered with it should reach ok. Can see it ok and is still enough room to be able to put a cd while in 1st, 3rd and 5th gears.
 
I was planning to do this and put a row of gauges in the top slot, I had not thought about a screen in the top slot. Maybe I will now though, that looks top.
 
foilist said:
I was planning to do this and put a row of gauges in the top slot, I had not thought about a screen in the top slot. Maybe I will now though, that looks top.
Click to expand...
Yea then get Nissan Datascan running on the screen....;)
 
markbuts3 said:
Yea then get Nissan Datascan running on the screen....;)
Click to expand...

Where can I get a copy of this software and a cable to make it work?

Any Idea
 
that screen looks well good, but haven't decided what to put in top slot yet.

Was thinking just a cup holder but seriously re-thinking about a screen, do you need a dvd / playstation etc as well for the screen to actually do anything useful? or do these screens have a combined dvdplayer or similar?
 
foilist said:
Where can I get a copy of this software and a cable to make it work?

Any Idea
Click to expand...

Blazt do a USB one or PMLS do a serial one. Both sell the software too. Martin (Blazt) is registered on NPOC.. both links are on the contacts page of toms site (see below)

Here's Tom's site for the software.. http://home.curl.aunz.net/tpkolo/DataScan.htm

Here's a couple of chops. On the second one the big orange square is the shift indicator :)
 

Attachments

  • data display chop.jpg
    data display chop.jpg
    79.3 KB · Views: 40
  • dashboard chop.jpg
    dashboard chop.jpg
    78.4 KB · Views: 39
That screen is a VGA touchscreen and was connected to a laptop to run MP3/Video/GPS etc but the lappy was stolen from the car :(
 
I will get in touch with the guy I am having that, after all the price of these screens has plumetted on ebay.
 
markbuts3 said:
Blazt do a USB one or PMLS do a serial one. Both sell the software too. Martin (Blazt) is registered on NPOC.. both links are on the contacts page of toms site (see below)
QUOTE]

This looks mint! I have the JVC head unit with the lil 3in screen, Could i hook it up to this???
Click to expand...
 
smoggy_gti said:
markbuts3 said:
Blazt do a USB one or PMLS do a serial one. Both sell the software too. Martin (Blazt) is registered on NPOC.. both links are on the contacts page of toms site (see below)
QUOTE]

This looks mint! I have the JVC head unit with the lil 3in screen, Could i hook it up to this???
Click to expand...
You need a computer to connect the interface up to then the computer displays the image. Can your HU take a video input at all ?? VGA or S-video or just RCA video ???
Click to expand...
 
VGA is the 15 pin monitor cable.

I asked because you asked if you could hook it up to your HU :rolleyes:

There is a pocket PC version of the software being written by a guy on sr20forum
 
You must log in or register to reply here.
Back
Top Bottom