Help needed fitting Phase 2 rear lights

Almera_SRi_Red

Almera_SRi_Red

i've got a few questions fitting the phase 2 rear lights to my phase 1's.
Would i need a sealant, if so where can i get them from?
im also in need of the bulbs that go in them or are they also interchangeable i.e phase1 rear lights bulbs in phase 2's. if not where can i get them from.
thanks. Tayo
 
just use the sealant thats on the lights you buy or if thats all gone the stuff on your old ones, seems to stay sticky for a while and all it really needs to do is keep moisture out, the bolts hold it on so aslong as theres a decent amount all the way round it will be fine.

the bulbs should be the same except the indicator ones which will probably be orange/silver bulbs that flash orange in the p2s but with the p1s having an orange lense they will probably have plain old clear bulbs. no idea if the bulb holder is the same though. even if the bulbs dont fit there only cheap anyway.
 
the bulbs do fit but as sprint says you will need orange bulbs for the indercaters as the p1's are clear and just heat up the old stuff on your p2's with a hairdryer!
 
You must log in or register to reply here.
Back
Top Bottom