Idiots guide to removing front door upholstery n15?

Just got some new speakers for the front doors, removed all the screws i can see, checked and double checked for more and no joy.
I cant even see how to remove the window handles lol, like i said an idiots guide needed.
Thanks.
 
I posted up a few days ago about removing the window handles, can't find it on my phone though.

apart from that you should have two screws on the right and left and a few along the bottom, then one inside the handle. then push it up and out.

you will need to get the window handle off first

-phone-
 
flat bladed screwdriver x 2, to prize the handle forward the second to pop off the clip be sure to keep hold of the clip though as u need it to re attach handle
 
apparently then proper way to do it is to use the flathead to push the clip down, thus releasing it and allowing you to just pull the handle off. I posted the image from the FSM

-phone-
 
Cheers for that i``m assuming its just the handle stopping me from getting it off as everywhere else seems loose enough to remove.
 
I have always got a bit of a rag pulled it down between the handle and doorcard wind the window a bit and the clip falls out.

Sent from my GT-I9300 using Tapatalk 2
 
Good tip there Damo. I used to use a strip of mutton cloth. If you look at the picture Hally put up the other day it makes sense.
 
Job done, the cloth between the door card and handle worked a treat. The factory speaker cones had rotted to fook, big bits of the foam bass diaphram were gone, bit cheap n nasty to carry the clarion name eh, no more farting and rattling at long last.
 
Back
Top Bottom