RCL Kit

im still looking for the RCL unit in my mera, anyone know where it is so wildchild can have it, lets face it nissan quality is better than something like that no offence like
 
I wouldn't even know where to start looking mate, are there any wires you can follow from the white box in the door panel or something?

Dya think the nissan one would be easier to fit?
 
wildchild88 i have a complete p1 alarm control unit complete with working master fob and motion sensors.pm me if interested
 
How much will I have to buy extra to fit that though Syms?

i.e. extra Fobs

How hard is it gonna be to fit?

If i remember rightly, I think Cov's had fobs with it.


How much do ya both want?
 
its a doddle to fit and all you will need is 1 NAT's key to program using the master fob. I also have the nissan instructions on how to code it in... as said before pm me if interested
 
Damo-Sri said:
http://www.edirectory.co.uk/pf/880/mia/d/toad+rk30+remote+system+for+central+locking/pid/2733379

Buy this one. Doddle to fit and really good quality. will only lock both doors if you have a solenoid motor in both doors.
Click to expand...
I have 5 doors, since it has full (key activated - no fob) central locking already, i'm guessing it will work?


syms said:
its a doddle to fit and all you will need is 1 NAT's key to program using the master fob. I also have the nissan instructions on how to code it in... as said before pm me if interested
Click to expand...
What do you mean by NATS key? I have the two keys I use to open the doors and start the car, I know these says NATS on them, but don't believe they're "Master" keys, like when I had the peugeot, one of the keys was red.


To Both:
How easy is "a doddle"? is the main wiring already in the car? Is it a case of plugging the wires? where do the units connect to? How long will it take?


Thanks
Wild
 
the MASTER keyfob is used to obtain the code. Its about a 10step procedure (simpe as anything) getting the code from your master key to your NATS key. The difference is the NATS key has a red and a blue button. red to lock/unlock blue to arm/disarm motion sensors. All wiring will be there matey plug and play!!

doddle - easy :P
 
Ah, so you have the Master Fob & the control unit - and I just need to get some fobs and program them with the master fob??

This sounds like the easiest option tbh, how much are you wanting for it?
 
yes so all you need is a NAT's fob. If you have an old 1 lieing about you can re-use that 1 by programming the new code onto the chip.pm me bro
 
You must log in or register to reply here.
Back
Top Bottom