What's to be done?

Benskett

Benskett

Start a thread letting people know what's been done/going to be done to members cars.

I'll start.

Autech Pulsar

Been done

UK spec headunit fitted with all new Alpine speakers
Calipers Painted
Full paint correction (by myself - de-swirling etc)
Raised bonnet

To be done

Dayama Coilovers - Deposit Payed
Carbon Bonnet (remaining raised)
Short Shifter - Bought, awaiting fitting
Lightweight Flywheel
Uprated Clutch
AP Motors tune up
Drivers door crease removed and resprayed, Autech front bumper fixed and sprayed
JDM the GTi Wheels - like this....

255102705.jpg


Badass :cool:

Lets see what other members plan/have to do :)
 
Almera GTi phase 1

been done (not a lot)

speakers and headunit upgraded
painted calipers
sprayed rocker cover
findanza lightweight flywheel
sr20de swapped to sr20de (old one blew up)
armrest cover for the cubby hole (yet to fit)
decat
sports downpipe (no pre-cat)
dropped 40mm on spax springs

to be done

phase 1 bodykit (had it for a while, needs to be sprayed and fitted)
sr20det swap (from pulsar for the power it deserves!)
4 pot brakes
full uprated exhaust system
full respray
rota slipstreams
interior retrim
and other bits and pieces im yet to think or decide of.


should be making a start on the list later in the year, maybe in time for next years jae, when the funds have become available. keeping my car untils it dies so time is no object.
 
Almera Sri Phase 1

Done

Phase 2 gti Skirts
Porsche Turbo front splitter
Stainless steel rear box
Mild steel centre section
Stainless Nemesis Performance de-cat pipe
NGK Iridium plugs
Champion Triple Sheild leads
BMC style carbon fibre airbox w/CAI
Chrome hard piping for the above
Red rocker cover
Black calipers
Stainless battery cover
Colour coded washer and expansion bottles
JDM 3-slat grille
RGM Headlight eyebrows
Carbon fibre number plates
Wiper mod with punto arm
De Globe
DIY Phase 2 Gti black backed indicators
Maserati clear side repeaters
Tinted windows
Lowered -40mm on PI springs
3G Discs with Mintex 1144 pads front
Ferodo discs and pads rear
Mercedes style 'Flat' front widow wipers
Omex sequential shift light
Simoni racing black leather gear gaitor
Momo gear knob
Infinity Audio system
JVC Exad Headunit
Clifford Concept 300 alarm with tilt and shock sensor and Remote start.
Peter Griffin (Family Guy) mascot hanging form Jesus Handle in rear
Sparco carbon pedals

To do

Fit bonnet lifters
New clutch
New rear crank oil seal

DONT ADD ANYTHING ELSE TO THAT FUCKING DONE LIST!
 
N16 1.5 'E' Phase 1 - May 2000 ( my member's rides thread )

It's only a 1.5 so I'm concentrating on handling, looks and comfort but not going OTT.

Been Done..
Team Dynamics Pro Race 2 lightweight 17" alloys (Matt Neil limited edition test version) .
205/40/17 Federal SuperSteel tyres.
Eibach Pro Spring Kit (30mm drop).
K&N 57i Induction Kit + DIY Aluminium Heat Shield.
DIY Foglight cold air feed + mesh grille.
DIY Front spoiler mesh.
Phillips Blue Vision Headlight/Sidelight Bulbs and blue indicator bulbs.
Dark grey seat covers + heated massaging back panel.
400W sub/amp combo in boot.
Razo Gearknob
AOC sticker on rear window.
Painted calipers and hubs gloss black.

Done Today..
Kenwood KDC-W6537U headunit + Maxtor One-Touch III mini 160GB USB hard drive stashed in top cubby-hole.

To Be Done..
New Calipers.
Custom Cat-Back.
Front Strut Brace.
Adjustable Shocks.
Paint touch-ups.
 
Ph1 Almera Si ga14de

Done

• 15” wolfrace sumo alloy wheels
• Apex Lowering Springs
• 2 1/2”Stainless Steel Exhaust system – MIJ Performance
• Induction Kit / Cone Filter
• Re-sprayed Rocker Covers (one white, one black)
• Breather Filter
• Partially stripped interior
• Colour coded rear number plate recess
• 1995 Primera GA16de cylinder head – ported and polished
• GA14de camshafts and followers
• GA16de Valves
• GA16de intake manifold – port matched, / polished
• GA16de Throttle Body – Modified and polished
• GA16de fuel rail and injectors
• Apexi NEO SAFC piggyback computer
• FSE power boost valve FPR
• Advanced ignition timing


Awaiting fitment

• IHI Turbocharger RF4H
• Custom ceramic coated turbo manifold
• Stainless steel custom down pipe
• Modified sump - to suit turbo application
• FM Intercooler
• Aluminium intercooler piping, dump valve T-piece and pipe joiners
• Boost gauge
• Toyota Starlet GT re-circulating valve

To be done

• New Engine Block (either GA 14 or 16)
• SR20de fuel rail and injectors
• SR20de Throttle Body
• Perfomance cams (JWT)
• Forged Engine Internals
• Lower Compression (8.5:1)
• Larger Turbo (T28)
• More Boost
• LSD
• Fidanza 1.6 Flywheel
• Strut Brace front and rear
• Lighter alloy wheels (13” or 14”)
• Uprated Clutch
• Coilovers
• Bucket Seats
• Momo steering wheel
• All round brake upgrade including rear disk conversion
• New intercooler (front mount)
• Respray
• Ph2 Headlights or JDM orange indicators
• VZR Grille and Carbon Bonnet

How i want it to look: (poor attempt on MS Paint!)
IMGP02170JDMstylee.jpg
 
Almera GTi

Done:
Hotshot gen6header
Custom downpipe
De-cat
Custom cat-back
relocated llambda sensor
cold air feed
HKS induction kit
Nismo FPR
Relocated the FPR
de-globed
new rear calipers
new starter motor
p2 rears
headlight protectors
NISMO rad cap
NISMO oil ap
NISMO gearknob
sony cdx-m730
7" motorised flip-out monitor located in DIN slot
Jackson 780 Class A B 1400W 4 channel amp
Punch p3 competition sub
rockford fosgate P162S components
Garmin nuvi deluxe bluetooth sat nav

To FIt:
JWT S3r Cam's
Dastek Unichip
VZR Grille

To Do:
Lightweight flywheel
New clutch
New handbrake cables
 
1999 GTi

Done:

Kent 256 cams
bmc cai filter
short shifter
ssa manifold and downpipe
jap can
k sport coilovers
raised bonnet

Awaiting fitment:

Fidanza flywheel
Act HDSS clutch
fully ported and polished head, inlet mani and TB.
SS brake hoses and 5.1 fluid

Future:

Rota Grid's
Thermoblok spacers
Trust 1.0mm metal head gasket
Finish full system (soon)
And many more, when I think of them.....


Ps. Don't wrap it :lol:
 
1999, gti

done: (in 2 years)

ss header
decat
2.25" catback ( 2nd system)
jwt s3r cams
xtd 9lb flywheel
piperx filter
polished TB
17" lenso reizen (3rd set)
pi springs
short shifter, cut down shaft also
clear side repeaters
deglobed
debadged
bump stripes removed
cup holder
standard discs twice
ss hoses
redstuff pads
5.1 fluid
corny plates
lots of tyres


to do:

coilovers
bigger brakes
 
DONE

custom back box
custom de cat
pipercross panel filter
coil overs
willwood 4 pot calipers
310mm discs
braided hoses
painted rear callipers
cup holders
flake paint dash parts
hands free kit
200sx leather seats
3 point harness's
rear seats removed
leather trimed door cards
chrome door handles
clear side repeaters
colour coded around rear lights
de badged
de bump striped
de globed front indiactors fitted with silver bulds
de locked passenger door
fiat punto rear wiper
flake paint
private plate
rear wiper parking at bottom of window
single wiper conversion
towbar
extra tailights added
jbl components
kenwood headunit
kenwood mp3 changer
sony 6x9's
sony amp 300 watt
sony amp 444 watt
2x JBL 10" subs
boot retrimed
wolface hi octane
P7000 tyres

TO BE FITTED

fit pulsar engine
lite wieght flywheel (fidanza)
organic clutch (fidanza)
gearbox with phantom grip in diff


TO BE DONE

get phase 2 headlights and mate them with E36 bmw headlights
get and fit 2 new rear brake callipers for when the engine goes in
 
1999 GTi.

Done since October 2006:

Fitted P2 rear lights.

Fitted Janspeed backbox.

Replaced standard bootlid badges with custom vinyl versions.

Fitted standard GTi alloys.

Added private plate.

Fitted ebay cupholder in bottom DIN hole.

Relocated CAI from foglight hole to behind front bumper brake duct & re-fitted foglight.

Fitted new discs & pads all round.

Fitted reconditioned front brake calipers.

Fitted Sony bluetooth H/U.

Waiting to be fitted:

S/S lead & dizzy cover.

Lowering springs.

P2 front airbag seats (just need to sort the wires out first).

Replacement P2 front bumper.

Replacement rear spoiler.

To be done in no particular order:

Source & fit reconditioned rear calipers.

Raise back of bonnet.

Replace cracked drivers headlight.

DIY Suteki vent.

Remove dents in bodywork.

Full respray.

Alloys sprayed black.

Possibly fit a carbon bonnet. :D

& anything else I may come up with in future. :)
 
Done
17" Fox Evo 6 Alloys with 215/40/17 Toyo Proxes T1-S
KW Variant 1 Coilovers
K57i Induction Kit
Sport Plus Side Skirts
Rear Window Tints
Custom Gear Knob - not another one in the World!! lol
Kenwood Head Unit
JVC 6x9s
Component Door speakers.

To Do.

LED Black rear lights
Boot build
Bucket Seats (maybe)
 
Done:

17" wheels
Tinted windows
Smoothed bootlid, lock and wiper removed
Apexi SAFC fuelling controller
Shortshifter
Lowered 30mm
Powerflow SS backbox, 3" exhaust exit
Painted rocker cover and matching fluid reservoir/filler caps
Induction kit
Cold air feed pipes from arch and front splitter

To do:
Sell the car. :P
 
Nissan Almera Si ph1 5dr Red

Done
Colour Coded Mirrors
Various painting under the bonnet
GTi Alloys
GTi Steering wheel & Handbrake cover
Random Aftermarket gear knob
Chrome Tailpipe cover till I get a powerflow :D

To Be Done
Get rid of rust on drivers door... (Really need to get this done but keep putting it off!)
Leather gearstick Gator (This weekend!)
Painted Rocker Cover (Already got it, but can't get old one off! :()
Ph2 headlights, Indicators (& Deglobe), & Grill (Early July)
Foglights (Hopefully early july if I can get my hands on cheap ones)
Powerflow exhaust
Lowering Springs
Panel Filter




Probably loadsa other things i've forgotten about too haha
 
1999 Gti

DONE

4-2-1 Manifold
de cat
Cat back exhaust
Jwt s3r cams
K n N with heat sheild
Lowered -40mm
painted calipers
swapped to dot 5.1 fluid
bumpstrips removed
deglobed indicators
clear repeators
punto wiper and parked along bottom
Alpine headunit

Sat at home waiting to be fitted

lightweight flywheel
lightweight crank pulley
Stage one clutch

Future plans within 6 months

Nismo FPR
16" alloys
JDM 2 slat grill
wind deflectors

Future plans (hopes) :roll:

Machined head inlet and TB
Dastek ecu
Coilovers
Slightly modified front bumper
Full respray in orginal red with rear plate recess colour coded
 
98 1.4 Si
done:
K&N panel filter
5Zigen back box
lowered (ebay springs + new front shocks)
Enkei RP-01 wheels
GTI front lip/sideskirts
JDM GTI grill
sub/amp in boot

to be done:
wheels - ones got a chunk out of it
tires - nankangs are crap...
rust on driver door to sort

sell it and buy something that can actually pull the skin off the top of a rice pudding...
 
WildChild88 said:
Yeah the ga14 is a bit poncy really aint it!

You got a quote for drivers door rust yet buddy?
Click to expand...

DIY dude. im not terrible at spraying, just lazy at the weekends. only problem is you always struggle to get a colour match on red almeras......
 
How do you do it? I'm not bad at spraying just lazy too, got a company near me that does really good colour matching, so always get paint from there, never had a problem matching.

you grind the rust out obv, do you then have to respray the whole door?
 
if i can get a paint match ill blend it all in. full respray has crossed my mind, but not touching it til after me holiday...
 
You must log in or register to reply here.
Back
Top Bottom