Autech GTi
- Thread starter Sam
- Start date
why not do what we did with nistro's bud?
....phone....
....phone....
sorry I just checked his thread and I can't find the pics, basically a t piece just after the rocker cover exit, one side to the rocker, one side to the crankcase exit and the third to a catchcan and back to the inlet
....phone....
....phone....
a t piece as in shaped like this> T
one opening of the t connects to the rocker cover exit, another opening connects to the crankcase exit, and the third goes to the catchcan input, and the catchcan output goes to the inlet pipe. i'll get a pic today if you can't visualize it
....phone....
one opening of the t connects to the rocker cover exit, another opening connects to the crankcase exit, and the third goes to the catchcan input, and the catchcan output goes to the inlet pipe. i'll get a pic today if you can't visualize it
....phone....
yeah we had to do this to nistros when he fitted the highport cover a few months back, unfortunately his engine bay is in bits due to prepping for the swap so here's a quick pic of what I'm on about
I think this is a better option than putting holes in it to make it like a gti rocker, as I think the baffles are set differently
....phone....
I think this is a better option than putting holes in it to make it like a gti rocker, as I think the baffles are set differently
....phone....
I thought you'd already fitted one to the tech, or am I mixing up the n1
....phone....
....phone....
Sweet, so glad the silver beast is back.
Tyte electric tape yo!
Glad it's getting back to its better former self.
Glad it's getting back to its better former self.
Think ill do the electrical tape on my coilovers.. not yellow mind 
Must be nice owning two of the best N15's Autech/N1 ... if you can afford running both!
Must be nice owning two of the best N15's Autech/N1 ... if you can afford running both!