DV is good for a turbo,,?!
Movs Black GTi
- Thread starter mov_mera
- Start date
debatable, a re-circ would be better but its better than, as Ross said, shoving boosted air into your rocker cover.
---------- Post added at 00:33 ---------- Previous post was at 00:32 ----------
:double fuck:
Everything nearly finished now!
Engine out fitted the LSD box, new clutch and engine/box painted silver... manifold also sprayed with VHT paint.
GTi brakes on with Goodridge brake lines.
Front/Rear ARB and panhard rod fitted. Will need spacers for the front to stop it touching the gear linkage and manifold. Had problems with the rear arb will need drill out the snapped stud.
Recaro Seats fitted
Raditor on with two slime line fans
Nismo Strut brace on
Booked in Unique exhaust on thursday cause no exhaust atm... getting 2.5 mandrel bent system with either a SPOON N1 backbox or a Skyline R34 backbox
Engine out fitted the LSD box, new clutch and engine/box painted silver... manifold also sprayed with VHT paint.
GTi brakes on with Goodridge brake lines.
Front/Rear ARB and panhard rod fitted. Will need spacers for the front to stop it touching the gear linkage and manifold. Had problems with the rear arb will need drill out the snapped stud.
Recaro Seats fitted
Raditor on with two slime line fans
Nismo Strut brace on
Booked in Unique exhaust on thursday cause no exhaust atm... getting 2.5 mandrel bent system with either a SPOON N1 backbox or a Skyline R34 backbox
cool n15 mate!! i like your rims!! 
cool n15 mate!! i like your rims!!
Thanks pal:biggrin:
how did you paint them?
I did them.. Spray can job 
sand them down.. well.. Fill where need be, one coat of filler primer, then couple layers of primer,, sand down, annd final paint
let it dry well, then laquer
sand them down.. well.. Fill where need be, one coat of filler primer, then couple layers of primer,, sand down, annd final paint
let it dry well, then laquer
spray laquer?I did them.. Spray can job
sand them down.. well.. Fill where need be, one coat of filler primer, then couple layers of primer,, sand down, annd final paint
let it dry well, then laquer
and you sand them with sand-paper?
Yeah, Spray Laquer..
and yeah, sand paper
and yeah, sand paper
i sprayed my rear bumper with laquer and after some time it made cracks.
how many time has been passed since you laque the rims? and are they ok now?
Yes. as Mov said, i had a look at that pipe. it doesn't go into the rocker cover..
on a standard sr20, Theres a pipe which comes out from under the inlet, its a metal pipe and then rubber pipe attached to that, im not sure where it goes to on the standard sr's but on the turbo, it goes between intercooler pipe
on a standard sr20, Theres a pipe which comes out from under the inlet, its a metal pipe and then rubber pipe attached to that, im not sure where it goes to on the standard sr's but on the turbo, it goes between intercooler pipe
loose the yellow fogs... doesnt look right....
appart from that ... looking good
appart from that ... looking good