Nope one of me mates,
nice little car, Being a handful of trouble, Engine is out for some Fresh ACL bearings and Headgasket :zoidberg:
My N15 VZR
- Thread starter D_turbo
- Start date
nice little car, Being a handful of trouble, Engine is out for some Fresh ACL bearings and Headgasket :zoidberg:
Flat spot is a bit of a killer, but not bad for the Mods done, Still a few bits to be done
Quickest iv had yet haha
Few Pics From ITCC Today
Didnt get to wash it and was filthy from the trip up
Lately Iv Added Blue Blox Wheel Nuts
A Blue Cold Air Feed
Fitted EBC green Stuff pads
And Picked up a Fidanza Flywheel
And haVE A stage 2 clutch and xtd flywheel stuck in customs
Picked up some New Steel Air Box Piping
And Removed the Flat spot on my ecu
list of engines pls. nice power that 178bhp, did the operator say anything about the transmission losses? i think i like the wheels, 6 spokes are growing on me?
looks real good, what type of rims are those?
Its not a wheel dyno so its only a guess iirc,
it may have to do with tyres and drag? The tyres had to be pumped to the absolute last as i was scraping the dyno so iv been told that would explain a bit of the drop?
Thanks Lads, There SSR type Cs, Really changed the car IMO,
Have more plans soon
it may have to do with tyres and drag? The tyres had to be pumped to the absolute last as i was scraping the dyno so iv been told that would explain a bit of the drop?
Thanks Lads, There SSR type Cs, Really changed the car IMO,
Have more plans soon
What tyres have you got dude? The wheels I know are fecking light so could well be drag as you say.
Only slightly relevant but my wheels came with odd tyres and I've still got them on. I'v noticed a significant weight difference between them. One side is Continental Sport Contact and the other Hero Milanaza. The Hero is a fair bit heavier. So it shows how tyres can play into it.
Only slightly relevant but my wheels came with odd tyres and I've still got them on. I'v noticed a significant weight difference between them. One side is Continental Sport Contact and the other Hero Milanaza. The Hero is a fair bit heavier. So it shows how tyres can play into it.
I have 2 Not so great Proxie S4s on the front, And My Roll bar was catching the roller,
SO we had to Put alot of pressure to raise the Car a tiny bit to make it work, and In turn I presume Had an affect on drag or so?
Maybe im wrong, ill be back for another dyno and see what he says lol, As he said, its not a wheel dyno so dont take it as gospel , But all that matterd to me was that i know iv a good healthy engine
@EDK...Have you held yours with out tyres :no: WOWWW there light
SO we had to Put alot of pressure to raise the Car a tiny bit to make it work, and In turn I presume Had an affect on drag or so?
Maybe im wrong, ill be back for another dyno and see what he says lol, As he said, its not a wheel dyno so dont take it as gospel , But all that matterd to me was that i know iv a good healthy engine
@EDK...Have you held yours with out tyres :no: WOWWW there light
increased tyre pressures mean less contact on the rollers, meaning less drag, meaning higher whp figure. i would say the extra drag is coming from your ultra low stance and possible need for another wheel alignment.
i now look at bhp, as its an indication of the engine power oddly enough lol
i now look at bhp, as its an indication of the engine power oddly enough lol
Maybe thats it man, I honestly dont lol, But he said from the off that I had a fair amount of drag,
But as you said Its BHP ill look at unless its a wheel Dyno i go on lol, and for now its a measuring tool is all, Want to go back in a while with a few more small bits done
Got a delivery Today.
Xtd Stage 2 Clutch, Xtd Flywheel, Cold Air Feed, And fidanza Flywheel, And Some New Indcution Piping to Take out the Bends in the Std One
Prob going to use the Fidanza Flywheel
Another Few Mods to come in a while
Also Need some 75MM samco hosing. or billion, Any one got some spare or know where to get it? Just Sleeving For Throttle Body
Xtd Stage 2 Clutch, Xtd Flywheel, Cold Air Feed, And fidanza Flywheel, And Some New Indcution Piping to Take out the Bends in the Std One
Prob going to use the Fidanza Flywheel
Another Few Mods to come in a while
Also Need some 75MM samco hosing. or billion, Any one got some spare or know where to get it? Just Sleeving For Throttle Body
will you be selling on whatever flywheel you don't use? as after feeling the difference in nistro's car after we fitted the new clutch and lightened fly it shot up to be number one in my mod list :yes:
Yeh Man, Just going to weight the 2, but Fidanza Is deffo Lighter, but for the price new of both, I think Id go Xtd tbh, Fidanza Twice the price for maybe a small bit lioghter
i weighed nistro's xtd and it came in at about 11lb iirc, i can't understand why people don't do a flywheel swap before all other mods including exhaust and inlet as the difference is immense!
well pm and let me know what one your not keeping and what price you want for it and i'll see if i'm interested
well pm and let me know what one your not keeping and what price you want for it and i'll see if i'm interested
^The fact that good ones dont come up for sale very often and are a fair bit of wedge may have a fair bit to do with that!