Nialls Vzr N1

Before you fit the fto brakes have 2mm skimmed off the mounting lugs and the caliper carriers, this will remove the need for spacing out the disc from the hub.
 
Last edited:
Yeah I was planning to do that with the hubs spacers are shite!

Powerland doesn't perform he is right almost anyone that looked at it that had a clue of the way manifolds work said it was shite... but they sound soooooo good ha ha.
 
8f99361841f453920f6ab7feae529adc.jpg
aaf8a3ac39ae39c984d0f8ab9aec4eea.jpg
2d5db87352995943c28f3af3eb7be58f.jpg
a06c7ee483ae77faac3ed6a5b6688937.jpg
c4eadcdd1cf28ce47d88fda69bcca427.jpg
ab33a2a7bfc6a81b1b83eb5ea5c93f7a.jpg
5263a18fca10f0c09156e9acb7aad711.jpg


90% of the welding done one or two more holes left to fill and then it'll be time to dry build the entire bay again.
Getting time to do anything is a nightmare between work and college exams but the end of next month should see the bay painted.
 
So its July and work continues very fucking slowly on the N1. Relocated to a mates shed where he builds drift cars so when im not working with him im at the N1.
At the moment im in the middle of plating the unwanted holes in the bay as some of the plating was to rough to work with so the badly filled holes were holesawed out and plated flush with the original metal. Leaving it far tidier and alot more discreet. The primer and paint will completely conceal any trace of them.
Ive put a timeline on the car now as im suck of it sitting up looking butchered so i will be updating weekly from now on.

Before
5e642014facab522475d3a2add4dc1dc.jpg

5051dbe9e68e0b18d30f73a701417651.jpg

555f4e7cd417a4c83c112385424203de.jpg


After

b464e0d0a746ac7b929c6ea80bc83ba6.jpg

d6f98f55677680113fe76305ee1f2be2.jpg

eb9c00cadffa9e71a95481be4eb3283a.jpg

e945f98895274ed94f0cb67f47aa2349.jpg

3878713a02653cf641887f59e6bf0cc5.jpg

4c09b9041db8508817884dd8f90a450a.jpg
 
Got to respect what your doing...I just wouldn't have the patience. To attempt it... rust proofing yeah but smoothing out the bay no!
 
Thanks man. Its tedious as fuck as 8m not amazing with a welder. Very time consuming. The first hole took around 45mins to get perfect. As its curved with a ripple through it from factory and had to be shaped and dollied accordingly... yay.
 
6 Years Later.... Almost together again.
 

Attachments

  • Screenshot_20190425-005134_Snapchat.jpg
    Screenshot_20190425-005134_Snapchat.jpg
    1.3 MB · Views: 7
  • 20200112_202819.jpg
    20200112_202819.jpg
    1.4 MB · Views: 6
  • 20200202_164500.jpg
    20200202_164500.jpg
    1.5 MB · Views: 7
  • 20200410_212854.jpg
    20200410_212854.jpg
    2 MB · Views: 7
  • 20200512_151105.jpg
    20200512_151105.jpg
    1.6 MB · Views: 6
  • 20200513_200621.jpg
    20200513_200621.jpg
    1.4 MB · Views: 6
  • 20200516_182347.jpg
    20200516_182347.jpg
    1.6 MB · Views: 6
  • 20200516_182341.jpg
    20200516_182341.jpg
    1.6 MB · Views: 7
  • 20200516_182358.jpg
    20200516_182358.jpg
    1.5 MB · Views: 9
  • 20200627_053118.jpg
    20200627_053118.jpg
    1.8 MB · Views: 9
  • 20200718_181617.jpg
    20200718_181617.jpg
    1.8 MB · Views: 8
  • 20200718_181624.jpg
    20200718_181624.jpg
    1.5 MB · Views: 8
  • 20200729_190959.jpg
    20200729_190959.jpg
    2 MB · Views: 8
  • 20200729_192504.jpg
    20200729_192504.jpg
    1.9 MB · Views: 8
  • 20200808_023426.jpg
    20200808_023426.jpg
    1.7 MB · Views: 8
  • 20200822_161728.jpg
    20200822_161728.jpg
    2 MB · Views: 8
  • 20200822_223538.jpg
    20200822_223538.jpg
    1.7 MB · Views: 8
  • 20200824_211514.jpg
    20200824_211514.jpg
    1.8 MB · Views: 8
  • 20200824_211521.jpg
    20200824_211521.jpg
    1.7 MB · Views: 7
  • 20200824_211542.jpg
    20200824_211542.jpg
    1.9 MB · Views: 7
Back
Top Bottom