Actually from the picture it looks low eh, havent offered the 2-1 section up yet but plan to make up something at the front anyway
Stani's SR20 Micra Build
- Thread starter stani1029
- Start date
Actually from the picture it looks low eh, havent offered the 2-1 section up yet but plan to make up something at the front anyway
Haha i suppose i could for the temporary use this year. Hmm.....Front exit out the bumper?
Well i hope i never have to replace the water pump belt with engine in car, what a mission! Had to remove the engine mount and lower the engine and remove the crank pulley!
But got the belts on and tight, got gearbox oil in, coolant is in so i decide to give the engine a turn over for first time
Received my panhard rod too but couldnt get it fitted
And heres the exhaust ill use at the moment
But got the belts on and tight, got gearbox oil in, coolant is in so i decide to give the engine a turn over for first time
Received my panhard rod too but couldnt get it fitted
And heres the exhaust ill use at the moment
Last edited:
Got the panhard rod sorted out! Stub had been removed and replaced with a nut and bolt but was no use to me as the bolt was too small in diameter.
You can see ive also fitted the fuel tank in the above pic. Also got the fuel lines in, filter, petrol. So maybe its time to start??!!!!
All set
But then....
Heres what happened
Turns out theres a hole in the oil filter and its in a really awkward place so ive no idea how it got there
New filter ordered, also need a new battery so hopefully next video will be it driving as i couldnt get the chance!!!
Cheers
You can see ive also fitted the fuel tank in the above pic. Also got the fuel lines in, filter, petrol. So maybe its time to start??!!!!
All set
But then....
Heres what happened
Turns out theres a hole in the oil filter and its in a really awkward place so ive no idea how it got there
New filter ordered, also need a new battery so hopefully next video will be it driving as i couldnt get the chance!!!Cheers
No its like a screwdriver has punctured it but i cant see how its possible lol will get photos next time im up there and replacing it
And its a minor setback, it starts so im happy after hacking all the wires out lol just wish i knew if it drives or not!
Ah never knew that, already ordered a nissan one!
Ive had a very busy last few weeks but i got a few hours tonight and its done! New oil and filter, new battery, new track rods, bumpers on, new reg plates, all bolts checked over....
http://vid1038.photobucket.com/albums/a467/stani1029/Mobile Uploads/trimDEB959BF-E1D4-4748-B736-33F7FA792C09_zps2a94f90f.mp4
Phone died not long after so no videos of the drive but all is well! Didnt quite open the taps as much is id like to but better safe than sorry. Car has surprised me more than id expected, the pickup at low speed is just awesome, feeling really excited about whats to come with the car!
First off ill be picking up some suspension as the standard shocks and springs was a scary experience! And same goes for the tyres, i have a pair of federal 595 rsr for the front so will get some new rubber for the rears then get the car along to crail to enjoy whats been a hard few months preparing the car.
Then time to take it apart again haha!
Thanks to all who have helped so far
http://vid1038.photobucket.com/albums/a467/stani1029/Mobile Uploads/trimDEB959BF-E1D4-4748-B736-33F7FA792C09_zps2a94f90f.mp4
Phone died not long after so no videos of the drive but all is well! Didnt quite open the taps as much is id like to but better safe than sorry. Car has surprised me more than id expected, the pickup at low speed is just awesome, feeling really excited about whats to come with the car!
First off ill be picking up some suspension as the standard shocks and springs was a scary experience! And same goes for the tyres, i have a pair of federal 595 rsr for the front so will get some new rubber for the rears then get the car along to crail to enjoy whats been a hard few months preparing the car.
Then time to take it apart again haha!
Thanks to all who have helped so far
Ive had a very busy last few weeks but i got a few hours tonight and its done! New oil and filter, new battery, new track rods, bumpers on, new reg plates, all bolts checked over....
http://vid1038.photobucket.com/albums/a467/stani1029/Mobile Uploads/trimDEB959BF-E1D4-4748-B736-33F7FA792C09_zps2a94f90f.mp4
Phone died not long after so no videos of the drive but all is well! Didnt quite open the taps as much is id like to but better safe than sorry. Car has surprised me more than id expected, the pickup at low speed is just awesome, feeling really excited about whats to come with the car!
First off ill be picking up some suspension as the standard shocks and springs was a scary experience! And same goes for the tyres, i have a pair of federal 595 rsr for the front so will get some new rubber for the rears then get the car along to crail to enjoy whats been a hard few months preparing the car.
Then time to take it apart again haha!
Thanks to all who have helped so far
Fair play Stani, You've never failed to deliver. This is just immense
Sent from my SM-G900F using Tapatalk
Needs to lose the bonnet catches, coilovers but not too low mabye steel 15" wheels. Make some sleeper then
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk