wow - another piece of shaggy_magic
dd
dd
Tom SRI Red
- Thread starter Tom SRi
- Start date
shaggy_master
brapp brapp!
Here's the story then..
Monday
Rujo arrived with me at around 2pm.
Got her in the Garage at 4pm after dropping Tom at the Train station etc
GAY16DE stripped/disconnected
ECU/ Interior connections disconnected
NATS Immu box whipped out, new one put in obviously
Engine Dropped y0
Leaving me with this....
Joe
Monday
Rujo arrived with me at around 2pm.
Got her in the Garage at 4pm after dropping Tom at the Train station etc
GAY16DE stripped/disconnected
ECU/ Interior connections disconnected
NATS Immu box whipped out, new one put in obviously
Engine Dropped y0
Leaving me with this....
Joe
shaggy_master
brapp brapp!
Tuesday
Was straight on the case preparing the SR20 to go in... took the manifold heatshield off to find that in the past some Dicked had snapped a Mani stud.. I'm not one to bodge so that had to be rectified, Drilled and removed using modified Easy-Out.
Got the mani off and removed Lambda ready to fit to Tom's Toyosport header
Looped the fuel lines not needed by the SR20, and removed the carbon canister:
Slotting the SR into place...
Bling!!
BUT IT DIDN'T FECKING FIT!! (outside 2 cylinders bolt spacing was too close to the centre...)
That was modified anyway, and the bungs & Lambda were sealed in...
Fitted:
Bay nearly done at the end of the day...
SHE STARTED FIRST TIME
Joe
Was straight on the case preparing the SR20 to go in... took the manifold heatshield off to find that in the past some Dicked had snapped a Mani stud.. I'm not one to bodge so that had to be rectified, Drilled and removed using modified Easy-Out.
Got the mani off and removed Lambda ready to fit to Tom's Toyosport header
Looped the fuel lines not needed by the SR20, and removed the carbon canister:
Slotting the SR into place...
Bling!!
BUT IT DIDN'T FECKING FIT!! (outside 2 cylinders bolt spacing was too close to the centre...)
That was modified anyway, and the bungs & Lambda were sealed in...
Fitted:
Bay nearly done at the end of the day...
SHE STARTED FIRST TIME
Joe
shaggy_master
brapp brapp!
Wednesday
Right so I only had 3 hours to finish off the job.. and test drive it...
Intake knocked up outta shit I had lying around
Completed Engine Bay:
And outside...
All done!
Joe
---------- Post added at 16:49 ---------- Previous post was at 16:48 ----------
Not a bad transformation...
Before:
After:
Joe
Right so I only had 3 hours to finish off the job.. and test drive it...
Intake knocked up outta shit I had lying around
Completed Engine Bay:
And outside...
All done!
Joe
---------- Post added at 16:49 ---------- Previous post was at 16:48 ----------
Not a bad transformation...
Before:
After:
Joe
Good Man..
Its a real buzz when it starts the first time. REAL buzz
Its a real buzz when it starts the first time. REAL buzz
shaggy_master
brapp brapp!
Yeah - I was more excited about it than him TBH - I love the first startup and the first drive...
Wow nice Plug and Play threat. :clap:
Joe! I LOVE YOU lol abosolute legend. Since I left Joes at about 1:30 Ive driven 280 miles on the sr20 and all I dunno what to say. Words can not describe the difference lol. The engine is running sweet as, even better after i wacked in the new sparkeys (£6 ebay ones)
Next is:
- Remove resonator box
- New Cat back
- New HTs
- try and get on top of the RUST!
- Cams
Next is:
- Remove resonator box
- New Cat back
- New HTs
- try and get on top of the RUST!
- Cams
I told you the difference would be big!
nice engine! you have to paint the rocker cover! 
nice engine! you have to paint the rocker cover!
Thanks! I will do it at some point, black with red writing
shaggy_master
brapp brapp!
The engine swap... Yeahh thats minor now, 6 bolts and the slag's dropped out y0.
As for fitting that B@$¥@&d Toyosports manifold.... Well....
I sent an email to the ebay seller to see if he will send me some free shit y0! So I am going to benefit even more from your hard work lol. Hope the gangsta wad made the toyosports worth it lol
