Autech Pulsar GTi

[shaggy_master]

The difficulty is.. Mazworx will not ship with USPS...
I spoke with them last week about it:

Shipping is 200.00USD to you. But what I can do is split the shipping cost in half so total for you will be 699.00 Shipped. Sounds to me this is a sweet deal.

Just been talking to a mate of mine, and he recently had an ASP header posted in from the states, and he said USPS posted it for $100, is that a service you could possibly utilize?
Thanks
Joe

Sorry we do not use USPS. The service sucks and takes forever not to mention damaged or possible missing package.

Joe

 

[Raceworx]

it sounds to me like you all need to have your orders combined and shipped to one point save alot of money and maybe get a discount on the headers aswell..

 

[shaggy_master]

it sounds to me like you all need to have your orders combined and shipped to one point save alot of money and maybe get a discount on the headers aswell..

There's only about 1 or 2 left and they aint making any more lol

 

[white_biscuit]

Never used either companies myself, or seen there products. But word of mouth tells me they goood

http://www.meercat-exhausts.com/manifolds.htm

http://www.justengines.unseen.org/acatalog/Custom_Manifold_Examples.html

 

[shaggy_master]

Never used either companies myself, or seen there products. But word of mouth tells me they goood

http://www.meercat-exhausts.com/manifolds.htm

Yes they could make you a sweet looking manifold.. but I wonder how many sweet looking manifolds Mazworx or ASP made and flow tested (and realised they were shite) before they perfected the design.
Joe

 

[happyharrysco1]

justengines is for r/c engines lol

 

[DBull]

FAIL!!!

 

[Sam]

Bahahahahaha

 

[RAJackson]

that made my day!

 

[bboy90]

Never used either companies myself, or seen there products. But word of mouth tells me they goood

http://www.meercat-exhausts.com/manifolds.htm

These guys arent too far from me everyone round here says their work is great but a bit expensive.

 

[mera red gti]

thats supa dale, the rest is just time now. well done boi
HLM Bromsgrove booking soon?

 

[white_biscuit]

Yes they could make you a sweet looking manifold.. but I wonder how many sweet looking manifolds Mazworx or ASP made and flow tested (and realised they were shite) before they perfected the design.
Joe

Can you not take a ASP or Mazworx manifold to them, to sample and make an exact copy?

 

[Dale]

thats supa dale, the rest is just time now. well done boi
HLM Bromsgrove booking soon?

Cheers Dave, dunno where i'll be going, Ive just bought a UNICHIP from Mongo-tuned so i'm going to make some enquiries, i think Aldon Automotive are now Dastek Dealers (to be confirmed) so i may go there again. I figured the stock Autech 7500rpm rev limit will do me fine with this UNICHIP.

Anyway, i've still got my CAI to sort out, i want to do something a bit different here...but yet to really look into it and what space and dimensions are available.

Im thinking a huge velocity stack in the Autech front fog aperture, then using 5" cold air ducting from there to either a large BMC CDA or my current HKS Mushroom filter. Followed by a RR GTi MAF upgrade and 3" Solid intake pipe.

 

[stufagti]

DALE!
two words.....

redline tuning,

the are top! the best i know at mapping the Dastek! seriously, ill look after you and get you a good price

 

[shaggy_master]

Cheers Dave, dunno where i'll be going, Ive just bought a UNICHIP from Mongo-tuned so i'm going to make some enquiries, i think Aldon Automotive are now Dastek Dealers (to be confirmed) so i may go there again. I figured the stock Autech 7500rpm rev limit will do me fine with this UNICHIP.

You're right dude, when I had the UNICHIP I took it to them, they can map it, at a cost of £50 p/h.
He said it'd probably take roughly 4-5hours from scratch, less if the map isn't miles out (which it won't be).
The upside to that UNICHIP is that its already mapped for a high comp DE so it'll run the car just fine.
Good buy man, it'll compliment your build great! Although I would be wanting to go higher than 7.5k with those sexy C3's
Joe

 

[Dale]

Had a delivery today....

Behold the Mazworx 4-1 SR20 Header:

As some of you know, the car is up and running now..just needs the new header installed, new tyres, TAX and MOT and then off for a remap.

 

[mov_mera]

 

[RAJackson]

quite a piece of metal there!

 

[happyharrysco1]

very nice piece of kit there! i think that's the longest run primary i've seen on a 4to1, just awesome!

 

[craiGTi]

looks gawjus, want one. and well done dale can't wait to see this