Eddie's SRi

craiGTi said:
eddie, the pattern on the autech one is worse than the GTi :P i thought you meant the subtle grey vzr colours for some reason. but your choice :lol:
Click to expand...

:lol: like i say i prefur the pattern over Gti intetior but also prefur way the headrests moulded into the back and the rear bench is one peice.. seamless ;) .. and i know not many people have Autechs so that in itself is quite cool

Still way 2 go on cosmetic front mind

Respray & smooth out wiper hole on tailgait
Fit Autech front bumper
VZR spoiler
VZR rear spats
Coilies winded down
205/50 Hankook V12's + 5mm spacers

Then regards to looks the N15 will be complete, possibly blowover/respray touchup at some time

Using this car as my inspiration

3-1.jpg


1-1.jpg


This club has really opened my eyes to the potentional of N15's ... didnt even know of Japan pulsars when i joined up...


Gona stay on the GA scene for a while longer, until ive got a nice lump sum saved up for next engine route but quite contened with the power/weight ratio and fun factor ive achived so far. Bring on shakeys 2010.. Liam its gona be fun boi :lol:
 
Went to visit a shanty town within Oxford the other day, really was a sight to behold some parts :lol:

dsc00782lz.jpg


Ill let the pictures speak for themselves.. :)

dsc00784yx.jpg


Direct fitt too

dsc00785or.jpg


Took it out for a spin today to test out my New Cg-Lock (seatbelt clamp)... really helps on corners :)

Cheers for the heads up on those Leigh
 
Just a device that locks the seatbelt tight to you, like a racing harness would for a fraction of the cost and they're quite practical.
 
Psycho_Eddie said:
Nt yett, needs abit of fettling... rails on seats are not interchangeable & bolts m6 instead of m8 etc I noticed one chair is missing a plastic cover.. u never told me that :( .. im hoping a ph1 almera at the scrappies would fit Just about to get some stuff to relocate my battery & tray to the boot :D
Click to expand...
plastic cover? I did not know of any plastic cover missing? Sorry dude i don't have a clue.
 
How the interior stands at the moment, I have decided it shall stay like this at least until SR20 engine conversion. But since my GA provides ample smiles and is most reliable engine I have ever had so far .. soo its staying in... no rush for SR20 just yett :lol:


dsc00791f.jpg
 
looks real nice eddie :)

a few things,
1 how come you havent removed the upright drivers side seat mount?
2 ive only just thoiught this idea, how about you get some thin ply/mdf wood and mount your 6x9's into the spaces where the rear door cards used to be, and if you cut some holes in the wood it wont make the panels rattle either :)

keep up the good work :)
 
stufagti said:
also the black seat were from a gti being broken iirc on ebay,
Click to expand...

;) hence direct fitment .. doubt that black cab seats would even fit :lol:

Was a funny, day 5 Muslims breaking a car on sum guys taxi cab yard. owner constantly swearing & shouting. One random guy in a van (white male) pulled up put along side the taxi yard... rolled window down put his fingers up swore then sped off... don't think I am going to visit that part of Oxford again :lol:
 
stufagti said:
a few things,
1 how come you havent removed the upright drivers side seat mount?
2 ive only just thoiught this idea, how about you get some thin ply/mdf wood and mount your 6x9's into the spaces where the rear door cards used to be, and if you cut some holes in the wood it wont make the panels rattle either :)
Click to expand...
:)
 
stufagti said:
looks real nice eddie :)

a few things,
1 how come you havent removed the upright drivers side seat mount?
2 ive only just thoiught this idea, how about you get some thin ply/mdf wood and mount your 6x9's into the spaces where the rear door cards used to be, and if you cut some holes in the wood it wont make the panels rattle either :)

keep up the good work :)
Click to expand...

Cheer dude, in regards too..

1) I kinda still need this unless I want seat attached at 3 points only :lol:

2) Trust me I thought about this got mdf from back in summer, but the place in question isnt completely level for a baffle etc. But its allmost like the N15 was designed to have speakers where I put them :) ... ghetto bracket ftw! Nd lucky the box's have thick carpet (muffles/absorbs vibrations) and they are very secure

dsc00795t.jpg
 
You must log in or register to reply here.
Back
Top Bottom