Nige's N15

[chunky]

Nats doesnt stop fuel pump anyway. Its the injector that it controls.

This reinforces

How did you plug the engine loom in? The engine is out a ph1 an yours is a ph2 so the looms don't match?

This

When I swapped from Uk gti to the import, although both technically phase 1...the import interior loom required the phase 2 uk gti loom to run...it would not run the fuel pump which was the small plug issue for the engine-interior loom

....Phone....

 

[fidd70]

Got a video but can't upload with tapatalk !
Here's the R-Vit concern

 

[fidd70]

Water temp sensor wasn't connected but is now !

 

[chunky]

What engine loom are you using?

....Phone....

 

[fidd70]

Phase 2 engine loom / phase 1 nats ! Engine is cracking over good spark, no fuel supply pump is not priming all fuses and nats boxes are ok tho !

 

[Spyke]

Take a picture of the nats box. Also did you swap the chip in the key?

 

[inahole]

Have you swapped over the nats box and the chip out of the key?

Take a picture of the nats box. Also did you swap the chip in the key?

Maybe you'll get an answer mush.

 

[fidd70]

Take a picture of the nats box. Also did you swap the chip in the key?

ey

Key chip swapped ! Will take a pic of the nats box when I'm back up the unit ! I've done a vid but not uploading !

 

[Spyke]

If the engine light is flashing and it's just turning over its a nats issue.

 

[fidd70]

Yep it is flashing !

 

[Dyldo]

NATS!!!!!!!!!!

Sent from my GT-I9100 using Tapatalk 4

 

[fidd70]

Any ideas on how to bypass the nats system ?

 

[Spyke]

It's not easy. It sounds like you've changed the wrong box under the dash.

 

[fidd70]

Any info Spyke is mucho appreciated !

 

[Spyke]

Get a picture of the nats box you've fitted

 

[Hally]

Black box, says Siemens on it, that's the NATS box.

-phone-

 

[fidd70]

No m8 !

 

[Spyke]

No?

 

[Simcard]

M8?

 

[dopey]

Mate