Search results

  1. A

    the N16 almera diesels...

    went to see an almera today, 2003 (53) Almera 2.2 Td SVE 112, 5dr had 107,000 on the clock with history up to 86,000 so was well overdue for a service the gear stick had a huuge amount of play in it, and the air bag light was flashing so i decided to leave it. looks and feels much...
  2. A

    the N16 almera diesels...

    hm, interesting in an ideal world i would much rather go for the 136 but because of insurance constraints i'd have to be 21 before they insure me on that, but tbh im just looking for an upgrade on the 1.5e i've got at the moment with hopefully some improvement in mileage (i'm doing mainly...
  3. A

    the N16 almera diesels...

    Hi all, Well its time for me to look for another car, and since having this 1.5e N16 i'm kinda hooked on Almera's. I've decided that i'm going to go for one of the diesels however i would like a little clarification on which engine etc is used in the following cars: Almera 2.2 Di SE (i...
  4. A

    Front fog lights on a 54 plate Tino

    this was the case with my almera 'e' spec, easiest way to check is simply to get under your car and see if the wiring is there, it may well be taped up behind the bumper a little bit. good luck
  5. A

    Adding fog's to non-fog almera

    if ya need a pair of silver fog blanks i've got a set going spare good luck!
  6. A

    Adding fog's to non-fog almera

    what do you mean spot lights for lights? do you mean the actual lamps themselves?
  7. A

    OBD I or OBD II?

    In response to my own question, after purchasing my own cable i can confirm the following: Nissan Almera N16 is OBD II, using the ISO 9141-2 Protocol, and any cable supporting 'EOBD' will work. Will install the software onto a more permanent laptop over the weekend and get back to this...
  8. A

    OBD I or OBD II?

    On a slight side-note, can someone confirm which protocols the almera's use for their OBD? (ISO9141/PWM/VPW) i've tried having a look around on the net and the only definitive information i can find is for the american cars and they state that those variants use PWM, just wondering if someone...
  9. A

    Adding fog's to non-fog almera

    you have yourself a PM chappy
  10. A

    Adding fog's to non-fog almera

    Hi all Considering adding front fog lamps to my 1.5e almera which didn't come with fogs as standard just wondering how much work is involved in this? I can easily obtain the front fog assemblies, what else would i require? the left hand side stalk has something like a fog light...
  11. A

    Iridium Spark Plugs for an N16, worth it?

    hi all just wondering what the general opinion is on Iridium Spark plugs for Almera's generally or perhaps more specifically for the 1.5 petrol engine many thanks
  12. A

    OBD connector on 2000 N16

    HI all could anyone help me locate the OBD connector on my almera please? can't seem to locate, have looked in all the usual places, under the steering wheel, glove box, down by the clutch pedal, cant seem to locate it! cheers
  13. A

    Hi, noob with juddery almera!

    I can confirm that i have the same problem with my w reg 1.5e almera, no idea what causes it but not too much bother, will be interesting to see what the more knowledgeable people on here think it could be on mine its usually just when on clutch, mechanic suggested it may just be engine...
  14. A

    Is it possible to play mp3 in an Almera?

    i can say that the speakers in my phase 1 n16 are shockingly good for a stock speaker set up, it was ridiculously crap with the stock casette player that was in there originally, but since i added my kenwood usb/mp3 head unit, noticeably better!
  15. A

    Fitting head unit into P1 N16, with a twist...

    meh i needed a quick and dirty way to mount the head unit and it worked for me, dont mind the 'useless tape player staring at me', i don't live in a very 'nice' end of town as it is, so having the head unit 'down there' with a removable faceplate is likely to attract less attention than had i...
  16. A

    Fitting head unit into P1 N16, with a twist...

    SOLVED!!! once you remove the lower panel (covering the cubby hole), the upper part containing the hazard light switch/vents unscrew the existing tape unit/fascia the cubby hole comes off with it as a black plastic box secured on either side by 2 screws remove the 2 screws replace...
  17. A

    Fitting head unit into P1 N16, with a twist...

    hi there i actually want to avoid buying a new fascia for it and would rather it went in the cubby hole, going to go and try it out in a bit, see if it fits or not, im just not sure whether i actually have to remove the black plastic or whether or not it just slots straight into there...
  18. A

    Fitting head unit into P1 N16, with a twist...

    Fitting head unit into P1 N16 Cubby Hole...-SOLVED! Hi all I've just purchased a kenwood KDC-W534U head unit for use in my almera, and i'm now thinking about how it's going to fit into my almera. i currently have the bog standard casette player and consequently i also have the little slot...
  19. A

    Squealing 'mera

    okie dokie, thats getting replaced tomorrow then although, i can only wish i had air con on that monstrosity of a car :( cheers for the help and swift replies chappy!
  20. A

    Squealing 'mera

    power steering fluid was topped up not too long ago for the first time ever.lol im gna be extremely ignorant now and ask, what is the fan belt and what does it do? im assuming it has something to do with the fan?! and has a belt of some sort involved?! is it major if i dont bother...
Back
Top Bottom